One for All Essential 6 Manuel D'utilisation page 9

SETUP
Deleting a learned function
If you want to delete a learned function and return that keys to its
original state, you can use the following procedure:
Press the Device key for the device you want to learn functions onto.
1.
2.
3.
Press the key you want to reset twice – the LED should blink
4.
twice and the learned function has been deleted.
VOLUME LOCK
If you primarily use one device for controlling volume, for example
a Sound Bar or Audio Video Receiver, it's possible to program your
Essential remote to only control that device when you use the Volume
Up, Down and Mute keys. To do this:
1.
2.
3.
The LED will blink twice.
4.
From now on, pressing the Volume Up, Down or Mute keys will always
control the Audio device, no matter what device you are controlling.
To unlock the volume, and return the remote to controlling each
device's volume individually, the procedure is:
1.
2.
3.
CHANNEL SHORTCUT MACROS
As well as their normal functionality, the Red, Green, Yellow and Blue
keys can be reprogrammed to select your favourite channels by genre.
If you press and release each of these keys, they will perform exactly
the same function as your original remote.
However they can be reprogrammed so that when they are held down
for 3 seconds they will send a channel number, then when held down
again for 3 seconds, they will send a different channel number. You can
group these channels by genre such as Sports, News, Movies and Kids.
Hold down the Setup key until the LED under the
Device key blinks twice.
Press 976 – the LED should blink twice
Hold down the Setup key until the LED under the
Device key blinks twice.
Press 993 – the LED should blink twice.
Press the device key for the device to always control
volume – for example Audio.
Hold down the Setup key until the LED under the
Device key blinks twice
Press 993 – the LED should blink twice
Press VOLUME DOWN – the LED will blink four
times and Volume is now unlocked.
9