Publicité
Les langues disponibles
Les langues disponibles
Disconnect battery pack from tool before making any assembly, adjust-
ments or changing accessories. Such preventive safety measures reduce
the risk of starting the tool accidentally.
Inserting and Releasing
Battery Pack
To insert the battery pack,
1. Set Forward/Reversing lever to the center
(off position).
2. Slide charged battery pack into the hous-
ing until the battery pack locks into posi-
tion (Fig. 2).
Your tool is equipped with a secondary lock-
ing latch to prevent the battery pack from
completely falling out of the handle, should
it become loose due to vibration.
To remove the battery pack,
1. Press the battery pack release button and
slide the battery pack forward (Fig. 3).
2. Press the battery pack release button
again and slide the battery pack com-
pletely out of tool housing (Fig. 3).
2610067354 GSR18V-400 02-22.indd 10
Assembly
Fig. 2
Fig. 3
-10-
2/17/22 1:19 PM
Publicité
