KitchenAid KES6403 Guide Des Produits page 11

5.
Press " " button to initiate the steam. Froth until desired level of foam and temperature
is reached. To stop the steam, press "
steam stops before removing the Steam Wand from the milk.
USING HOT WATER FEATURE
The Steam Wand can also dispense hot water which is great for an americano, tea, hot
chocolate, etc. You can also use hot water to pre-heat cups.
1.
Toggle the Mode Button to select Hot Water. Place a cup under the Steam Wand.
2.
Press Dose Button to select the volume of water 1 (~ 4 oz) or 2 (~ 6 oz). Press "
button to start water cycle. Water flows out from the Steam Wand.
NOTE: You can pause the cycle by pressing "
cycle complete.
" button again. To avoid splattering, wait until the
1 2
1 2
1 2
" button to stop the flow of water before the
"
11