Philips HQ444/33 Mode D'emploi page 6

ENGLISH
8
C
C
C
7 Slide the shaving heads back into the
retaining frame and put the retaining frame
back into the shaving unit.
8 Put the shaving unit back onto the shaver.
For extra thorough cleaning, clean the shaving
heads by putting them in a degreasing liquid (e.g.
alcohol) every six months.To remove the shaving
heads, follow steps 1 to 4 described above. After
cleaning, lubricate the central point on the inside
of the guards with a drop of sewing machine oil
to prevent wear of the shaving heads.
Trimmer
Clean the trimmer every time you have used it.
1 Switch the shaver off, remove the mains
plug from the wall socket and pull the
appliance plug out of the shaver.
2 Clean the trimmer with the brush
supplied.
3 Lubricate the trimmer teeth with a drop
of sewing machine oil every six months.