Publicité
Les langues disponibles
Les langues disponibles
1. Use the program selector button to choose a program.
2. Use the timer button to delay the start time of the program. Refer to section
3. Close the door to start the program.
CHANGING THE PROGRAM
Note:
You can only change the program shortly after the appliance has started.
1. Carefully open the door to avoid water spillage.
2. Push and hold one of the program selector buttons for 3 seconds.
3. Push the program selector button to choose the program.
4. Close the door.
The newly selected program will resume the course of the previously selected program.
DELAYING THE PROGRAM
Note:
The start time of a program can be delayed up to 24 hours.
1. Push the timer button to delay the start time of a program. Every time you push the button the start time will be
delayed with 1 hour.
2. Push the timer button again to increase the delay of the start time or to cancel the timer.
3. Close the door to activate the timer.
The program will start when the timer has finished.
STOPPING THE APPLIANCE
Note:
The appliance is silent for 40 to 45 minutes during the drying process.
Note:
A buzzer sounds five times when the program is finished.
Note:
The diswasher door must not be blocked when set to open automatically. This can disrupt door lock
functionality.
Note:
The floor lamp blinks for 5 minutes to indicate the program is finished.
1. Open the door if the automaric door function is disabled.
2. Wait a few minutes before you unload the appliance. The dishes are very hot and can break.
3. Push the on/off button to switch off the appliance.
Delaying the program
.
English
•
45
Publicité
