Comunello MOWIN AF-860 Instructions D'utilisation Et D'installation page 33

• one normally open contact with 12-24 VDC typically this means there is a status light (12 or 24 VDC) for the connected door, connected
to the relevant input. When the status light is on, the green light also comes on in the app and the other light goes off, and vice versa.
ATTENTION: the control unit can also work with the limit switch of only one connected automation. it is important to enable only the
limit switches actually connected with the procedure
Contact
12/24 VDC
NORMALLY CLOSED CONTACTS WITH NO VOLTAGE
Closing NC contact for automation 2
Common
Closing NC contact for automation 1
NORMALLY OPEN CONTACTS WITH NO VOLTAGE
Closing NO contact for automation 2
Common
Closing NO contact for automation 1
CONTATTO NO 12-24VDC (SPIA CANCELLO)
Contact
12/24 VDC
GATE
WARNING LIGHT
AUTOMATION 2
Common
GATE
WARNING LIGHT
AUTOMATION 1
OPERATOR CONTROL UNIT
AUTOMATION 1
OUTPUT FOR GATE WARNING
LIGHT 12/24 VDC
operation must be
warning light on = gate open
warning light off = gate closed
OPERATOR CONTROL UNIT
AUTOMATION 2
OUTPUT FOR GATE WARNING
LIGHT 12/24 VDC
operation must be
warning light on = gate open
warning light off = gate closed
33