Comunello MOWIN AF-860 Instructions D'utilisation Et D'installation page 22

2 CONNECTION DIAGRAMS
RECOMMENDATIONS
• Installation must be carried out only by professional technicians in accordance with the applicable electrical and safety regulations.
• All connections shall be operated without electrical voltage.
• Use proper cables.
• Don't cut the antenna
• Provide in the power line twith an appropriate disconnection device
• Dispose of waste materials in full compliance with local law.
• Do not exceed the specified load limits and use correctly protected power supplies.
2.1 CONNECT THE START CONTACT
Start contact must be connected to the "start contact" of the automation control unit.
WARNING:
• Contact must be free of voltage
USE VIA WIRE
The start contact of the AF-860 control unit is connected in parallel to any wire commands (e.g. buttons or key selectors) directly to the
automation control unit.
22