Comunello MOWIN AF-860 Instructions D'utilisation Et D'installation page 25

4 MANAGEMENT WITH REMOTE CONTROL
This procedure lets you programme/delete compatible 433.92MHz transmitters.
MULTIFUNCTIONAL TRANSMITTERS, CODES:
With multifunctional transmitters the transmitter control modes depend on the model used.
GENERIC (WIRELESS BUS) TRANSMITTERS, CODES:
The functions of the generic transmitters is "start of the automation".
4.1 RADIO PROGRAMMING
This procedure lets you programme compatible multifunctional or generic transmitters.
STEP 1
Press key 1 as many times as the output number on which you want to program the
transmitter
no. of presses LED colour
1 red
2 green
3 off
ACTION: Short press of button 1 LED: Turns on red/green
STEP 2
Within 60 seconds make a transmission with the transmitter to be saved.
See transmitter manual, the paragraph entitled "transmitter programming" for
specify information.
The led makes 3 Flashes and turns off.
Output paired with TX
OUT1
OUT2
/
ACTION: Make a transmission with the transmitter LED: Flashes 3 times
x1
25