Comunello MOWIN AF-860 Instructions D'utilisation Et D'installation page 32

6.3C CREATING A ALEXA ROUTINE
• On Alexa application, select the menu (1)
• Select "Routines" (2), and then add a new one
• Enter the name (3), the phrase you want to pronounce (4), and "add an action" (5) select "Smart Home", then select "Control scene".
Select the scene created on One Smart in procedure 6.3a.
6.3C DETAILED
The operation of the Start and therefore voice commands also depend on the operation of START contact in the automation control unit.
It is recommended to create voice commands consistent with the operation of the installation.
Voice command tips based on how the start works
START SET AS STEP-STEP (when it's close, open / when it's open, close / during the moving stops)
If automation is controlled without being visible, a generic command such as "start cacello/garage", "gate/garage" must be created
If you control automation by seeing its status, you can create multiple voice commands: "open the gate/garage", "lock the gate/garage"
or "close the gate/garage".
All of these commands refer to the same action (closing the start contact).
Clearly if the gate is in motion and the "open gate" command is sent, it will stop.
START SET AS OPEN ONLY, CONDOMINAL FUNCTION (whatever automation status the start will open)
Suggested commands "Open Gate" or "Open Garage"
7 ADVANCED PROGRAMS
VIEWING THE DOOR STATUS ON THE APP
To display the status of the door (open, closed, partially open) on the app, you must connect the contacts to the control unit.
The control unit can work with:
• one normally closed contact with no voltage when opening typically this means there is one micro limit switch for when the door
opens, connected to the relevant input. When the door touches the microswitch, the contact must open; this turns on the green light
in the app and turns off the other light.
• one normally open contact with no voltage when opening typically this means there is one micro limit switch for when the door opens
or closes, connected to the relevant input. When the door touches the microswitch, the contact must close; this turns on the green
light in the app and turns off the other light.
32