3 USE OF THE CONTROL UNIT
3.1 TYPICAL INSTALLATION
The system can be controlled by a radio commands, smartphone App OneSmart or voice commands.
The installation can operate with only radio controls or application only.
Instead, to use voice commands, at least the App configuration must be completed.
RADIOTRANSMITTER
CONFIGURATION
See paragraph 4
3.2 USE VIA RADIO
To control the automation via radio you must have compatible transmitters and therefore must carry out the association procedure, see
paragraph 4.
3.3 USE VIA SMARTPHONE APP ONESMART
The configuration procedures described in paragraph 5 above must be followed to control the lights by smartphone App.
3.4 USE WITH VOICE CONTROL
The configuration procedures described in paragraph 6 above must be followed to control the lights by voice commands.
24
APP CONTROL
CONFIGURATION
See paragraph 5
CONTROL UNIT
ROUTER WITH INTERNET
CONNECTION
VOICE CONTROL
CONFIGURATION
See paragraph 6