iKarus FUN Piccolo Notice De Montage page 38

Bell UH-1D
The 1:1 scale Bell UH-1D is a helicopter which was produced in very
38
high numbers. It was driven by a 1100 PS Lycoming-engine.
The Scale Body for the ECO Piccolo has been made in a 1:22 size.
Because of the very light weight of the body the flying time is only
between 30 second and a minute shorter.
The flying stability is influenced positively by the body.
Contents: Scale Body
Technical Details
Material: Nova Light
Weight: ca. 30 g
Dimensions B x L:
Bell 222/Airwolf
The Bell 222 is a very luxury and elegant civilian helicopter. The
helicopter can take two pilots and 5 passengers. The helicopter has got
two turbine engines with a power of 675 Ps. The speed of this helicopter
is 265 km/h with a maximum distance of 520 km and a height of 6 km.
The maximum starting weight is 3650 kg. The length of this helicopter is
10,98 meters.
The kit is extremely light and looks like the real thing. Like the picture
the body can also be painted as a Airwolf. As Bell 222 there are a lot of
different possibilities to color this helicopter. T o have retractable wheels
the Piccoboard can be modified without troubles to support a fifth channel.
For the retractable gear you need a extra Servo, (Best Nr 720367).
Contents: Scale Body, mounting material, wheels
Technical Details
Material: Nova Light
Weight: ca. 30 g
Dimensions B x L:
Length: 600 mm
Hughes 300
The 1:1 scale Hughes 300 is a two seats helicopters which is one of the
most sold models in the world. It is used for military, schooling purposes
and transporting purposes.
The extra weight of this model body is only 10 g, this means that your
flying time will almost not change.
Technical Details
Material:ABS-plastic
Weight:ca. 10 g
Dimensions W x L:115 x 540 mm
Order No.68352
New Fly like the big ones
3-D Piccolo Pitch Converstion Set
We developed an entirely new rotorhead with many new ideas.This set
converts an entry level Indoor Piccolo helicopter into a Powerful aerobatic
machine leaving the pilot to set the limits. Without affecting flight duration, but
drastically improving Performance, the Conversion Set even makes flying in
any weather condition an experience. The kit includes among others 9
ballbearings, CNC machined Mainblades with covering film, a new and
reinforced swashplate
Follower as well as a new swashplate. With appropriate transmitter settings to
idle up, the Piccolo turns into a fully aerobatic helicopter.
Using a Y-cable the new rotorhead can be even controled by a simple 4-
channel transmitter. The newly developed swashplate follower is now standard
in any normal Piccolo kit. You automatically will receive the new design when ordering the follower as a replacement part.In
addition there is now a safety clip available to prevent the head from disengaging during hard landings. There is in addition
a servo Order No. 717100 or 171200 Required. Order No. 67460
115 x 540 mm
Width: 170 mm
Order No. 68350
Airwolf Order No. 68351 Bell 222 Order No. 68353