Bosch GDS 18V-350 Professional Notice Originale page 7

Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The machine is intended for driving in and loosening screws
and bolts as well as for tightening and loosening nuts within
the respective range of dimension.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Tool holder
(2) Rotational direction switch
a)
(3) Belt clip
a)
(4) Rechargeable battery
a)
(5) Battery release button
(6) User interface
(7) On/off switch
(8) Handle (insulated gripping surface)
Application tool (e.g. socket spanner)
(9)
a) This accessory is not part of the standard scope of delivery.
User Interface
(10) Speed preselection indicator
(11) Automatic shutdown (ABR) indicator
(12) Mode button
Technical Data
Cordless Impact Screw-
driver
Article number
Rated voltage
A)B)
No-load speed
– Setting 1
– Setting 2
– Setting 3
A)B)
Impact rate
– Setting 1
– Setting 2
– Setting 3
A)B)
Max. tightening torque
– Setting 1
– Setting 2
– Setting 3
Machine screw diameter
Tool holder
Weight
Bosch Power Tools
Cordless Impact Screw-
driver
Recommended ambient tem-
perature during charging
Permitted ambient temperat-
ure during operation and dur-
ing storage
Recommended rechargeable
batteries
Recommended battery char-
gers
Protection class
A) Measured at 20–25 °C with rechargeable battery ProCORE18V
B) Depends on battery in use
Values can vary depending on the product, scope of application and
environmental conditions. To find out more, visit
www.bosch-professional.com/wac.
Noise/vibration information
a)
Noise emission values determined according
to EN 62841-2-2.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 99 dB(A); sound power
level 107 dB(A). Uncertainty K = 3 dB.
Wear hearing protection!
Vibration total values a
determined according to EN 62841-2-2:
Impact tightening of fasteners of the maximum capacity of
GDS 18V-350
the tool: a
The vibration level and noise emission value given in these
instructions have been measured in accordance with a
3 601 JM5 0..
standardised measuring procedure and may be used to com-
V= 18
pare power tools. They may also be used for a preliminary
estimation of vibration and noise emissions.
–1
min 1200
The stated vibration level and noise emission value repres-
ent the main applications of the power tool. However, if the
–1
min 1700
power tool is used for other applications, with different ac-
–1
min 2300
cessories or is poorly maintained, the vibration level and
noise emission value may differ. This may significantly in-
–1
crease the vibration and noise emissions over the total work-
min 1800
ing period.
–1
min 2600
To estimate vibration and noise emissions accurately, the
–1
min 3400
times when the tool is switched off or when it is running but
not actually being used should also be taken into account.
This may significantly reduce vibration and noise emissions
Nm 85
over the total working period.
Nm 200
Implement additional safety measures to protect the oper-
Nm 350
ator from the effects of vibration, such as servicing the
mm M10–M18
power tool and accessories, keeping their hands warm, and
organising workflows correctly.
1/2"
kg 1.5 (2.0 Ah)–2.5
(12.0 Ah)
12.0Ah
(triax vector sum) and uncertainty K
h
2 2
< 13.9 m/s , K = 1.5 m/s
h
1 609 92A 9DZ | (07.05.2024)
English | 7
GDS 18V-350
°C 0 to +35
°C –20 to +50
GBA 18V...
ProCORE18V...
GAL 18...
GAX 18...
GAL 36...
/II