HQ Power HQLP10006 Mode D'emploi page 6

4.3 Connection

Have a qualified electrician carry out the electric connection.

Connect the device to the mains with the power plug. All devices must be powered
directly off a grounded switched circuit. Do not connect to a dimmer pack.

The installation has to be approved by an expert before the device is taken into service.
5. Overview
Refer to the illustrations on page 2 of this manual.
1 microphone
2 display + menu buttons
3 power input
6. Operation
The device can be used in the following modes:

stand-alone mode

master/slave

with a DMX-512 controller.
6.1 Control Panel
Access the control panel functions using the four panel buttons located around the display.
Menu scroll through the menu options
upwards through the menu list
downwards through the menu list
Enter confirm a selection
6.2 Menu
mode
auto
sound
speed
sensitivity
silent scene
InFr
Addr
slave
colour
dimming
V. 02 – 05/09/2017
HQLP10006
programme description
Au 1 auto programme 1
Au 2 auto programme 2
Au 3 auto programme 3
So 1 sound programme 1
So 2 sound programme 2
So 3 sound programme 3
SP1-SP9 adjustable speed value
Se1-Se9 adjustable sensitivity value
on de-activated with ambient noise in sound mode
off activated with ambient noise in sound mode
on IR remote mode activated
off IR remote mode de-activated
2CH 2-channel DMX mode
4CH 4-channel DMX mode
Slav slave mode
UV 0-255
dim1-dim9 adjustable dimming value
4 DMX input
5 DMX output
6 power output
6
d001-d512
d001-d512
©Velleman nv