Polar Refrigeration T316 Mode D'emploi page 6

Masquer les pouces Voir aussi pour T316:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
UK
Filter for the drain system (for
GL192 only): Check the filter
monthly and clean if required.
Ensure the filter is repositioned
correctly after cleaning.
Automatic Cleaning Function
This Ice Maker is featured with an automatic
cleaning function. When the appliance has
completed up to 1500 ice-making cycles (roughly
after 3-month routine use), the "CLEAN" indicator
light will flash with audible alarm, indicating the
unit needs to be cleaned. It will keep flashing and
alarming until auto-cleaning is started, during
which ice can still be made.
1. Press and hold the "CLEAN" button for 3
seconds. The water box at the top will turn
down and up. When it returns to horizontal
position, press the power switch to O (OFF
position) and unplug the machine. Make sure
no water remains in the water box.
CLEAN button
CLEAN indicator light
Power switch
2. Unscrew the drainage valve cap at the right
lower part at the rear. Let the water drain from
the water reservoir thoroughly. Afterwards,
re-locate the drainage cap and screw tight.
6
T316_GL192_ML_A5_v6_20190814.indb 6
3. Add around 3L dilute cleaner into the reservoir.
Note: Choose ice maker specific cleaner and
follow the manufacturer's instructions.
4. Plug the unit and press the power switch to I
(ON position).
5. Press the "CLEAN" button. The "CLEAN"
indicator light turns on. The cleaner in the
water reservoir will be pumped into the water
box to start cleaning. After about 10 minutes,
the water box turns to vertical to drop the
cleaner. The appliance will repeat above
Drainage valve
procedures twice. Then, the "CLEAN" indicator
cap
light goes out, indicating auto-cleaning is
completed. Note: During cleaning, if the
"WATER LOW" indicator light illuminates, add
an extra 0.5L cleaner into the reservoir.
6. Turn the unit off and unplug. Remove the
drainage valve cap to empty the water
reservoir.
Model: GL192
Drainage valve
cap
Model: T316
Reservoir
Note: After auto-cleaning, use
the first 3 ice making cycles to
flush out the system. Discard
the water and ice created from
these initial cycles.
2019/8/14 15:41

Hide quick links:

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Gl192

Table des Matières