Publicité
Les langues disponibles
Les langues disponibles
b2)
The on/off functions are adjustable using the sliders (T) on the disc (pos.▲): when pushed
to the centre, the appliance stays off, when pushed towards the outer edge of the disc, it
turns on; slide the button to position it in either position (1 slider corresponds to 15 minutes).
Adjust the position of the sliders for the times of the day when the fan heater must be on
(slider to the outer edge) or off (slider to the centre): at this stage, the on and off periods can
be seen in segments on the disc.
The timer will repeat the same functions until the settings are changed or for as long as the
button remains in the "
First use: run the appliance to eliminate the "new smell" and any oil residue from the
manufacturing process for at least 10/15 minutes. During this operation, ventilate the room
well to eliminate the "new smell" that is given off by the appliance.
1)
Before to insert the plug into the power socket, check that the knob of the selector to pos.
"0".
2)
Insert the plug into the power socket.
3)
Turn the knob of the selector and select the required power.
4)
Turn the thermostat dial to the position of the required temperature.
5)
If desired use the programmer 24h.
6)
Turn the switches to "0" and thermostat "min" position to turn off the appliance, and
remove the plug from the power socket.
At each use, check that the air intake and dissipation grilles cannot become blocked;
furthermore, to avoid the risk of fire or overheating of the appliance, do not cover it or use it
to dry laundry.
Never leave the appliance connected to the socket if it is not in use, especially for long
periods.
In the event of a breakdown or malfunction, switch off the appliance and have it checked by
professionally qualified personnel; repairs carried out by unqualified personnel can be
dangerous and void the guarantee
CLEANING AND MAINTENANCE
Warning: before cleaning the appliance, turn it off, remove the plug from the plug point and
wait until it cools down.
• To ensure proper operation of the appliance, periodically check that the rear ventilation grille
is not blocked by fluff or threads: this should be done after removing the plug from the mains;
If necessary, use a vacuum cleaner, taking care not to damage the element.
• To clean the main outer casing using a soft, damp cloth; do not use steel wool or abrasive
products.
• If the fan heater is not used for long period of time, cover it and store it in a dry place; it is
advisable to place it in the original packaging to protect it from dust and moisture.
• Do not immerse the appliance in water or another liquid. Do not wash it with running water
or in the dishwasher.
• If you decide to no longer use the appliance, it is recommended that it is made inoperative
by cutting the power cord (first ensure that the appliance has been unplugged from the
power supply), and ensure that any parts that could represent a risk to playing children are
put away.
" position and the is insert the plug into the power socket.
14
Publicité
