Kohler SDMO Perform 4500 AVR C5 Manuel D'utilisation Et D'entretien page 28

8.5 Recommended fuel quality
Using fuel which does not comply with the following specifications exposes the equipment to irreversible damage not covered under
warranty:
- Cleanliness and quality: ensure that the petrol used does not contain water and that it is fresh and clean (not out of date or
contaminated). For the
- Octane rating: minimum octane rating of 87 (R+M)/2 or minimum octane rating of 90 (RON = Research Octane Number)
- Blends: the use of unleaded petrol containing up to 10% ethyl alcohol is authorised (France: SP95-E10). It is not permitted
to use unleaded petrol containing less than 90% petrol, e.g. E15, E20 or E85. Blends of methyl tert-butyl ether (MTBE) and
unleaded petrol are approved (up to a maximum of 15% MTBE by volume).
However, it is strongly recommended that the same type of fuel is used throughout the complete service life of the unit. If the unit is
used infrequently (less than once a month), use new fuel with each use or add a stabilizing additive to the fuel tank.
8.6 EU Declaration of Conformity
We, SDMO Industries - 270 rue de Kerervern, 29490 GUIPAVAS – France, hereby declare under our sole responsibility that the
following generating sets:
Equipment
Make:
description:
Generating set KOHLER-SDMO
1. Comply with the safety requirements set out in the Low Voltage Directive - 2014/35/EU of 26 February 2014 in application of the
harmonized standard EN ISO 8528-13: 2016
2. Comply with the provisions of the following Directives:
- Machinery - 2006/42/EC of 17th May 2006 in application of the harmonized standard EN 8528:-13 2016
- Electromagnetic compatibility - 2014/30/EU of 26th February 2014 in application of the harmonized standards EN 60034-1:
2010 (COR 2010) / EN 61000-6-1: 2007 / EN 61000-6-2: 2005 (COR 2005) / EN 61000-6-3: 2007 (AMD1 2011,
AMD1/COR 12) / EN 55011: 2009 (AMD 1 2010)
- Relating to the restriction of the use of certain hazardous substances in electrical and electronic equipment - 2011/65/EU of
8th June 2011 in application of the harmonized standard EN IEC 63000 : 2018
- Relating to noise emission in the environment by equipment for use outdoors- 2000/14/EC of 8 May 2000, via the
compliance procedure set out in Annex VI:
Notified body:
PERFORM 4500 AVR C5
PERFORM 4500 AVR C5 RCD
PERFORM 4500 AVR C5 RCD RRB
CETIM - BP
PERFORM 4500 AVR C5 RRB
67- F60304 –
SENLIS -
PERFORM 6500 AVR C5
FRANCE
PERFORM 6500 AVR C5 RCD
PERFORM 6500 AVR C5 RCD RRB
PERFORM 6500 AVR C5 RRB
Name and address of the person authorized to create and hold the technical file:
L. ANDRIEUX, 270 rue de Kerervern, 29490 GUIPAVAS / CS 40047, 29801 BREST CEDEX 9 – France.
1971_EN.docx
Trade name:
PERFORM 4500 AVR C5
PERFORM 4500 AVR C5 RCD
PERFORM 4500 AVR C5 RCD RRB
PERFORM 4500 AVR C5 RRB
PERFORM 6500 AVR C5
PERFORM 6500 AVR C5 RCD
PERFORM 6500 AVR C5 RCD RRB
PERFORM 6500 AVR C5 RRB
Trade name:
Type:
3499231920732
3499231920671
3499231920688
3499231920695
3499231920749
3499231920701
3499231920718
3499231920725
Measured
Type: sound
power level:
3499231920732
96,1 dB(A)
3499231920671
96,1 dB(A)
3499231920688
96,1 dB(A)
3499231920695
96,1 dB(A)
3499231920749
96,89 dB(A)
3499231920701
96,89 dB(A)
3499231920718
96,89 dB(A)
3499231920725
96,89 dB(A)
GUIPAVAS, 01/2022
L. ANDRIEUX
President, SDMO Industries
24/186
Serial numbers:
25-2021-00000000-000
> 52-2026-99999999-999
Guaranteed
sound Rated
power level output:
(LwA):
96 dB(A) 3200 W
96 dB(A) 3200 W
96 dB(A) 3200 W
96 dB(A) 3200 W
97 dB(A) 5200 W
97 dB(A) 5200 W
97 dB(A) 5200 W
97 dB(A) 5200 W
2022-01-12