Publicité
Les langues disponibles
Les langues disponibles
6.
Mechanical and electrical installation
Note: Wall plugs recommended by the EVSE supplier are intended for solid brick or concrete walls. If the EVSE is to be installed on a different type of surface,
the appropriate type of plugs should be used.
4
22
WALL WIRE
WALL WIRE
Connect the AC input wire, 3-phase
1.
loosen the screws (A)
25 mm
2.
insert the wire connector into the
terminal block (B)
3.
Connect the following wires:
• Green-yellow earthing conductor (C)
• L1 brown (D)
• L2 black (E)
• L3 grey (F)
• neutral wire (blue) (G)
4.
Tighten the screws (A) to the
appropriate torque, see section
7.10.
Information about additional security
measures, see section 7.4.1
1.
Secure the wires (A) with a strain
relief (B)
2.
Mount two screws (C) of the strain
relief
GROUND WIRE
GROUND WIRE
8
EARTH
EARTH
9
23
Publicité
