Publicité
Les langues disponibles
Les langues disponibles
9
Install Air Conditioner into Cabinet and Install Front Panel to Unit
1. Fix one end of the grounding wire on the cabinet with #M4x8-Z screw (FIG.21A).
FIG. 21A
2. Lift air conditioner and carefully slide into cabinet.
CAUTION: Do not push on controls OR finned coils.
3. Be sure air conditioner is firmly seated towards rear of cabinet. Re-install the shipping screws removed in step 1.
4. Fix the other end of the grounding wire on the lower right corner of the unit. Reconnect electronics plug if present.
(see FIG.21B) Position vent control lever so that it will thread into its channel in the front panel (see FIG.21C).
Hook front panel top tabs into slots on cabinet top, and rotate front panel down so that side tabs snap into place on
cabinet. Insert 4 previously removed screws through front panel and into air conditioner.
5. Insert air conditioner filter. Reinstall the front grille by hooking bottom tabs into slots on Front Panel bottom, then
rotating grille up to snap into place.
FIG. 21B
FIG. 21C
6
Installation Instructions
Vent control
correct location
Publicité
