sunjoe CJ603E Manuel D'utilisation page 8

Stand Assembly Fitting
1. Turn the shredder main body upside down, and fix the
standing assembly with wheels on the bottom of the main
body with the 4 nuts. Tighten the nuts with the wrench
(Fig. 5).
Fig. 5
Secure the nuts
Standing
assembly with
wheels
Main body
2. Turn the shredder to let it stand on the wheels. It's now
ready for use.
Operation
Starting + Stopping
m
WARNING!
Before starting, ensure that the feeding
funnel is empty.
1. Secure the extension cord using the extension cord
restraint hook located at the appliance cord. Securing the
extension cord in this manner protects against accidental
disconnect of the electrical cord during operation (Fig. 6).
Fig. 6
Extension
cord
2. To start the chipper, press the forward end of the forward/
reverse switch, and press the ON button (Fig. 7).
3. To power the wood chipper + shredder off, reset the
Basic Shredding Procedure
m
wear gloves during operation.
1. This unit is equipped with 2 hooks on each side. Hang the
Appliance cord
Extension cord
restraint hook
2. Connect the wood chipper + shredder to a proper power
8
Fig. 7
Forward position
Forward/reverse
button
Reverse position
forward/reverse button to the middle position, and press the
OFF button (Fig. 7).
WARNING!
Always wear ear and eye protection and
handles of the provided collection bag on the two hooks
before starting (Fig. 8).
Fig. 8
R
source and switch on the unit; the wood chipper + shredder
will start to work. Insert the shredding material inside the
hopper through the feeding funnel to shred them (Fig. 9).
ON button
OFF button
Collection
bag hook
Collection bag