Unpacking
Carton Contents
• Electric wood chipper + shredder main body
• Paddle
• Supporting legs (2)
• Wheel axle with hardware
• Wheels (2)
• Wheel caps (2)
• Nuts (4)
• Hex key wrench
• Wrench
• Collection bag
• Manual with registration card
1. Carefully remove the electric wood chipper + shredder and
check to see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the All Season Power customer service center
at 1-866-225-9723.
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the electric wood chipper
+ shredder. The packaging is made of recyclable materials.
Properly dispose of these materials in accordance with
local regulations or save the packaging for long-term
product storage.
IMPORTANT! The equipment and packaging material are
not toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suffocation
risk!
Assembly
Wheels Fitting
NOTE: The hardware for the wheels are already assembled on
the wheel axle.
1. Remove all the wheel nuts and shaft sleeves on the wheel
axle, and remove the washers on the wheel axle (Fig. 1).
Fig. 1
Wheel axle
Shaft sleeve
Washer
Wheel nut
2. Insert the wheel axle into the two supporting legs, and
re-assemble the washers and the shaft sleeves (Fig. 2).
Fig. 2
Supporting legs
Washer
Shaft sleeve
3. Put the wheel onto the wheel axle, secure with the wheel
nut. Using the supplied hex key wrench to fix the wheel
axle, at the same time use the wrench provided to firmly
lock the wheel nut (Fig. 3).
Fig. 3
Hex wrench
Wheel axle
4. Place the wheel cover in the center of the wheel, firmly
press to secure (Fig. 4).
Fig. 4
5. Repeat the above steps 3 – 4 to assemble the other wheel.
7
Wheel axle
Wheel
Wheel
nut
Wrench
Wheel
Wheel cap