Publicité
Les langues disponibles
Les langues disponibles
˜ Using the mounting hole, the bracket stand and the
suction cups
(Fig. C)
Note: When using the mounting hole
cups
must not be removed. Otherwise the IP protection is not guaranteed.
[
2 ]
Mounting hole
You can hang the product on a wall using the mounting hole
Notes:
Check that the mounting material (screws, dowels) is suitable for the wall.
When using the mounting hole
the distance between the wall and the product.
Bracket stand
Open the back cover
Place the semi-round part in the slot at the bottom of the front side.
Close the back cover
Note: Protect sensitive surfaces before setting up the product with the bracket
stand
.
[
]
Suction cups
Surfaces
Suitable surfaces
Unsuitable surfaces
[
1 ]
, make sure the screw is long enough to cover
[
1 ]
and remove the bracket stand
3 ]
[
(see "Before initial use") (Fig. C).
3 ]
[
Description
Smooth, dry and flat
surfaces
Smooth, dry and flat
surfaces
or the bracket stand
[
Use examples
Mirrors
Glass
Glazed tiles
Terracotta
Tiles with a relief pattern
, the suction
[
]
at the back.
1 ]
[
.
]
GB/IE
27
Publicité
