Connecting Speakers - L-Acoustics KUDO Multi-Mode WST Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6.2

Connecting speakers

®
The KUDO
enclosure is driven and powered by the dedicated L-ACOUSTICS
details please refer to the "LA8'' user manual also available on the L-ACOUSTICS
®
The KUDO
enclosure is equipped with two 8-point PA-COM
connection with the LA8 using the L-ACOUSTICS
®
another KUDO
enclosure in parallel using the L-ACOUSTICS
!
A maximum of three KUDO
IMPORTANT
®
The L-ACOUSTICS
wiring convention is as follows:
®
PA-COM
connector labels
* To locate the ''left'' and ''right'' sides put the enclosure horizontally with hatch on top and stay in front of the gill.
Figure 7: Connecting three KUDO
KUDO_UM_ML_2-0
®
DO10 or DO25 cable. The female socket allows connection with
®
enclosures can be connected per LA8.
A / B
C / D
E / F
G / H
DO10 or DO25
w w w . l - a c o u s t i c s . c o m
®
®
sockets wired in parallel. The male socket allows
®
DO.7 cable (see Figure 2 and Figure 7).
Connection to transducers
Left*-mounted LF transducer (+/-)
Right*-mounted LF transducer (+/-)
MF section (+/-)
HF section (+/-)
DO.7
DO.7
®
in parallel to an LA8 amplified controller
LA8 amplified controller. For more
®
web site at www.l-acoustics.com.
EN
13 en
13
13
13

Publicité

Chapitres

Table des Matières
loading

Table des Matières