KitchenBrothers KB4027 Manuel D'utilisation page 36

Problem
The product is not
working.
The product is
freezing too much.
The food is not cold
enough.
36
Cause
Temperature setting knob is set
to MIN.
The plug is not plugged in or
is loose.
The fuse is blown or defective.
The socket is defective.
The temperature is set too cold
(MAX).
The temperature is not set
correctly.
The door was open for an
extended period of time.
A large amount of hot food was
placed in the product within
the last 24 hours.
The product is near a heat
source.
Solution
Turn the knob to turn the
product on.
Plug in the power cord.
Check the fuse and have it
replaced if necessary.
This should be fixed by an
electrician.
Temporarily turn the
temperature setting knob
to a less cold setting.
Set the temperature
controller to the
recommended
temperature (chapter 3.2).
Do not open the door
longer than necessary.
Turn the temperature
setting knob temporarily
to a colder setting.
Keep the product away
from heat, areas where
the temperature is
relatively high and heat
sources such as ovens.