Cleaning
1.
Turn off the product and unplug it.
2.
Remove all food from the freezer and store it in a cold place where it cannot
thaw.
3.
Remove the door rubber.
4.
Clean the product with a damp, clean cloth.
5.
Dry the product thoroughly.
6.
Put the door rubber back before turning the product on again.
Defrosting
The product may gradually become covered with ice. If the ice becomes very thick
on the inside, complete defrosting should be performed as follows:
1.
Turn off the product and unplug it.
2.
Remove all food from the freezer and store it in a cold place where it cannot
thaw.
3.
Keep the door open to allow defrosting.
4.
Place a bowl under the product to catch the water.
5.
After defrosting, dry the product thoroughly.
6.
Plug the power cord back in to turn the product back on.
6. STORAGE
• If the product is not used for a long time, unplug it, clean the product and let it
dry.
• Leave the door open to prevent mold growth.
• Store the product in a dry, clean place, not in extremely high or low temperatures.
7. DISPOSAL AND RECYCLE
Think about the environment and contribute to a cleaner living environment! You
can contact your local council for all information on disposal options for discarded
products.
Note
◊ This product does not contain ozone-depleting gases, either in the cooling circuit
or in the insulation materials. The insulation foam contains flammable gases: the
product must be disposed of according to the regulations of the local authorities.
Avoid damaging the cooling unit, especially the heat exchanger.
Caution: Choking hazard and electric shock hazard.
◊ Before discarding, unplug and cut the power cord close to the appliance.
◊ Remove the door to prevent children from locking themselves in the product.
38