Kenmore ULTRA WASH 665.1329 Serie Guide D'utilisation Et D'entretien page 18

Options
TURBOZONE
TM
option
(on some models)
Blasts into every corner to eliminate
the need for soaking and scrubbing of
dirty, baked-on dishes. For your
toughest items, use the TURBOZONE
T M
option with the Pots & Pans cycle. See
loading information.
Can be selected
with
SmartWash ® HE
Pots & Pans
Normal Wash
What it does
Directs all of the
cleaning power of the
dishwasher to the
TURBOZONE
TM
area
during certain times in
the wash cycle.
Added time to cycle
Typical
42 55
Hi Temp
Raises the main wash temperature to
improve cleaning. When used with
the Normal Wash cycle this will
provide a little extra tough cleaning
capability, but not as much as the
Pots & Pans cycle.
SmartWash ® HE
Pots & Pans
Normal Wash
Raises the main wash
temperature from
105°F (41°C) to 130°F or
135°F (54°C or 57°C).
35 45
Sani Rinse
This high temperature option sanitizes
your dishes and glassware in
accordance with National Sanitation
Foundation (NSF)/ANSI Standard 184
for Residential Dishwashers. Certified
residential dishwashers are not
intended for licensed food
establishments. The Sani indicator
indicates at the end of the cycle
whether the Sani Rinse option was
successfully completed. If the
indicator does not activate, it is
probably due to the cycle being
interrupted.
SmartWash ® HE
Pots & Pans
Normal Wash
Increases the main wash
temperature from 105°F
(41°C) to 130°F (54°C)
and the final rinse from
140°F (60°C) to 156°F
(69°C).
6O 9O
Added
Water t
Gallons
(Liters)
0 - 3.7
(0 - 14.0)
0 - 3.7
(0 - 14.0)
0 - 2.6
(o - 10.0)
Heated Dry
Turns the heat element on after the
wash cycle is completed. Use rinse
aid with or without the Heated Dry
option for best drying results. Plastic
items are less likely to deform when
loaded in the top dish rack.
Available with
any cycle
except
Quick Rinse
Turns the heat element
on at the end of the
wash cycle.
52 52
tThe maximum additional water used for any combination of options is 3.7 gal. (14.0 L).
0
18