SIKA E2 Manuel D'utilisation page 18

Device Description
Qualified personnel
Operation and maintenance may only be carried out by qualified and trained personnel.
•
General safety instructions
Only use the device if it is in perfect condition. Check and replace damaged devices im-
•
mediately.
Do not remove any type plates or labelling from the device, as this will invalidate the war-
•
ranty.
2 Device Description
The digital pressure gauges E2 / D2 / C2 display the actual value and MIN/MAX. Their re-
spective accuracy is ±0.5% (E2), ±0.1% (D2) and ±0.05% (C2) of full scale (FS).
The sensor signals are sampled at 100 Hz (10 ms), allowing the measurement of pressure
peaks. The values are converted, displayed and stored in the continuously updated MIN/MAX
memory.
Versions
Standard
Accuracy (from end value)
Pressure range
-1...3 bar
-1...5 bar
-1...10 bar
-1...20 bar
-1...40 bar
-1...60 bar
0...100 bar
0...160 bar
0...250 bar
0...400 bar
0...700 bar
0...1000 bar
- 18 -
Resolution
1 mbar
1 mbar
1 mbar
1 mbar
10 mbar
10 mbar
10 mbar
10 mbar
100 mbar
100 mbar
100 mbar
100 mbar
Version with data logger
E2 0.5% D2 0.1%












© SIKA • Ba_Ref-E2D2C2 • 07/2024
E2 / D2 / C2
C2 0.05%


 
 
 
 
 
 
 
 
 
 