Parkside PASP 18 A1 Instructions D'utilisation Et Consignes De Sécurité page 22

˜ Emptying the metal container
Remove the container lid
o
container (see "Fixing and removing the
[ 10 ]
container lid") . Empty the metal container .
m WARNING!
Empty and clean the product before and
u
after use to avoid the collection of materials
that could pose a fire hazard in the vacuum
cleaner .
˜ Cleaning and replacing the
pleated filter
When the suction power of the product
o
decreases, clean the pleated filter
Removing the pleated filter
Fig . D
Remove the container lid
o
container (see „Fixing and removing the
[ 10 ]
container lid") .
Turn over the container lid
o
Hold the pleated filter
o
pleated filter in an anticlockwise direction .
Lift the pleated filter
o
mesh out of the product .
13 ] [
Take the pleated filter
o
mesh .
13 ] [
Cleaning the pleated filter
NOTE
Never clean the pleated filter
u
You would otherwise damage the pleated
filter .
Shake the pleated filter
o
pleated filter gently on the floor .
from the metal
[ 1 ]
.
[ 12 ]
from the metal
[ 1 ]
.
1 ] [
by the rim . Turn the
[ 12 ]
together with the wire
12 ] [
out of the wire
12 ] [
with water .
12 ] [
. If necessary, tap the
[ 12 ]
Inserting the pleated filter
Fig . E
Remove the container lid
o
container (see „Fixing and removing the
[ 10 ]
container lid") .
Turn over the container lid
o
side .
Insert the pleated filter
o
mesh .
13 ] [
Slide the wire mesh
o
pleated filter over the filter thread
[ 12 ]
Fixing the pleated filter
o
Hold the pleated filter by the rim . Turn the
pleated filter clockwise . Once the pleated filter
is fixed on the filter thread
mesh in place .
Replacing the pleated filter
m WARNING!
Check the pleated filter
u
damage and deformation . A damaged or
deformed pleated filter cannot be cleaned
and must be replaced . This is necessary to
maintain the functionality of the product and
to protect the product from damage .
Only use replacement filters from Lidl or
u
authorized resellers . Filters that are not
compatible with the product can lead to
injury and product damage .
˜ Cleaning and care
˜ Cleaning
Do not let the pleated filter
contact with water or other liquids .
Always keep the product clean, dry and free
from oil or grease . Remove dust from the
product after each use and before storage .
Regular and proper cleaning will help ensure
o
safe use and prolong the life of the product . The
best time for cleaning is right after completing
works .
Clean the product with a dry cloth .
o
from the metal
1 ] [
and put it to one
[ 1 ]
into the wire
12 ] [
with the inserted
[ 13 ]
.
[ 3 ]
and wire mesh
12 ] [ 13 ] [
, it holds the wire
3 ] [
regularly for
[ 12 ]
come into
[ 12 ]
GB/IE
:
21