Parkside PASP 18 A1 Instructions D'utilisation Et Consignes De Sécurité page 21

˜ Connecting the hose
Fig . C
Align with the notch in the internal
[ 9 ]
o
vacuum connector
[ 4 ]
Push the hose coupler
o
vacuum connector
4 ] [
Turn the hose coupler
o
direction until it is fully engaged .
Check if the hose
6 ] [
o
pulling the hose coupler
coupler does not move, the hose is connected
properly .
˜ Disconnecting the hose
Rotate the hose coupler
o
direction . Pull out the hose coupler .
˜ Connecting the tube
Push the tube into the hose adapter
5 ] [
o
˜ Fixing and removing the
container lid
Fixing the container lid
o
– Place the container lid on the metal
container .
10 ] [
– Lock the container lid in place with the
latches .
[ 11 ]
Removing the container lid
o
– Undo the latches
– Lift the container lid off the metal
container .
[ 10 ]
20 GB/IE
.
fully into the internal
7 ] [
.
in a clockwise
7 ] [
is installed properly by
slightly . If the hose
[ 7 ]
in an anti-clockwise
[ 7 ]
.
8 ] [
:
[ 1 ]
:
1 ] [
.
[ 11 ]
˜ Operation
m WARNING! Risk of injury!
Before operation, read the instruction manual
u
of the motorised vacuum cleaner you want to
use with the product!
Do not vacuum incandescent materials . Even
u
material that looks as though it has cooled
off on the outside may still be very hot on the
inside . Hot extracted material could be set
alight again in the air current .
Hot ashes should not be purged with water,
u
as the sudden temperature difference can
cause ruptures to the chimney .
Wait at least 24 hours before vacuuming a
u
fireplace to make sure that the fire has gone
out and the ash has cooled down .
˜ Connecting the product with
a motorised vacuum cleaner
(not included)
Secure the container lid
o
container with the latches
[ 10 ]
For the following steps, you need a motorised
o
vacuum cleaner and the associated hose
(Fig . C):
– Attach the hose adapter that belongs to
the hose of the motorised vacuum cleaner
(not included) with the external vacuum
connector .
[ 2 ]
– Connect the other end of the hose to the
motorised vacuum cleaner .
– The motorised vacuum cleaner now serves
as an external suction power source for the
product .
WARNING! Follow the operation procedures,
m
including the illustrations of the motorised
vacuum cleaner's instruction manual .
to the metal
1 ] [
.
11 ] [