Publicité
Les langues disponibles
Les langues disponibles
Troubleshooting
Problem
The DVD player does not start playback.
Picture freezes momentarily during playback.
Unable to select Progressive Scan on/off.
Images from this DVD player do not appear on
the television.
You forget your password.
When the following messages on the unit's
display.
(LOAD)
(STOP)
(OPEN)
(TITLE)
32
32
All manuals and user guides at all-guides.com
Solution
–
–
–
–
–
–
–
–
–
–
1)
2)
3)
–
–
–
–
–
Insert a readable disc with the playback side
facing down.
Check the disc type, color system (PAL/NTSC)
and region code.
Check for any scratches or smudges on the disc.
Press SETUP to turn off the setup menu screen.
You may need to enter the password in order to
change the parental rating level or to unlock the
disc for playback.
Moisture may have condensed inside the system.
Remove the disc and leave the system turned on
for about an hour.
Disconnect the power cord from the power outlet
for a few minutes. Reconnect the power cord and
try to operate again as usual.
Check the disc for fi ngerprint/scratches and clean
with a soft cloth wiping from center to edge.
Check that the output of the video signal is turn to
{Progressive}.
Reset the DVD player to the factory defaults.
Press POWER 8 on the DVD player to turn it on.
Press OPEN/CLOSE ; to open the disc tray.
Press and hold g and q on the DVD player at the
same time for more than 5 seconds with the tray
open.
All the settings return to the factory preset.
Loading the disc. Wait a moment.
Stopping the playback. Press PLAY/PAUSE q/h.
Insert a readable disc with the playback side
facing down.
Press OPEN/CLOSE ; to close the tray.
Press e r w q to select the title, then press OK.
Publicité
