Publicité
Les langues disponibles
Les langues disponibles
Heavy buildup of
frost on the door
seal
Unusual noises
Side panels are
hot
8. ENVIRONMENT
This appliance is marked according to the European directive 2019/290/UE
Waste Electrical and Electronic Equipment (WEEE). By ensuring this
product is disposed of correctly, you will help prevent potential negative
consequences for the environment and human health, which could
otherwise be caused by inappropriate waste handling of this product.
The symbol on the product, or on the documents accompanying the product, the Crossed-
Out Wheelie Bin, indicates that this appliance may not be treated as household waste.
Instead it shall be handed over to the applicable collection point for the recycling of electrical
and electronic equipment, or, if you are buying an equivalent product, to the retailer of the
new product.
The user is responsible for taking the appliance to the appropriate collection center at the
end of its useful life. Selective and appropriate collection for the recycling of no longer used
appliances and their disposal and destruction in an environmentally friendly manner, helps
to prevent potential negative effects on the environment and health, and encourages the
recycling of materials used to make the product.
For more detailed information about treatment, recovery and recycling of this product,
please contact your local authority, your household waste disposal service or the retailer
where you purchased the product.
9. WARNING
As we continuously improve our products for the benefit of our customers, we reserve the
right to modify technical characteristics without notice.
Warranties for FRIGELUX brand products are offered exclusively by selected retailers. No
part of these instructions may be considered as a supplementary guarantee.
FRIO ENTREPRISE cannot be held liable for errors or technical or editorial omissions in
this document.
Non-binding document.
A large quantity of warm food was
placed in the appliance within the last
24 hours
The appliance is near a heat source
Door seal is not air tight
Appliance is not level
The appliance is touching the wall or
other objects
A component e.g., a pipe, on the rear
of the appliance is touching another
part of the appliance or the wall
It's normal. Heat exchange is in the
side panels
Turn the temperature regulator to a colder
setting temporarily
Please look in the installation location section
Carefully warm the leaking sections of the
door seal with a hair dryer (on a cool setting).
At the same time shape the warmed door
seal by hand such that it sits correctly
Re-adjust the feet
Move the appliance slightly
If necessary, carefully bend the component
out of the way
Take gloves to touch side panels if needed.
36
on
Publicité
