Publicité
Les langues disponibles
Les langues disponibles
3. INSTALLATION INSTRUCTIONS
Ventilation condition
The position you select for the refrigerator installation should be well-ventilated and has less
hot air.
• Do not locate the refrigerator near a heat source such as cooker, and avoid it from
direct sunlight, thus guaranteeing the refrigeration effect while saving energy
consumption.
• Do not locate the refrigerator in the damp place, so as to prevent the refrigerator from
rusting and leaking electricity.
Heat dissipation space
When working, the refrigerator gives off heat to surroundings. Therefore, at least 300mm of
free space should be spared at the top side, more than 100mm on both sides, and above
50mm at the back side of the refrigerator.
Level ground
Place the refrigerator on the solid and flat ground (floor) to keep it stable,
or else, it will give rise to vibration and noise. When the refrigerator is
placed on such flooring materials as carpet, straw mat, polyvinyl chloride,
the solid backing plates should be applied underneath the refrigerator, so
as to prevent color change due to heat dissipation.
Feet adjustment
Before any operation, make sure that the refrigerator is
not plugged in. Only the front legs of the refrigerator are
adjustable.
• To raise the refrigerator, turn the feet clockwise.
• To lower the refrigerator, turn the feet counter-
clockwise.
Door adjustment
Precautions before operation:
Before operation of accessories, it shall be ensured that the refrigerator is disconnected
from power.
Before adjusting the door, precautions shall be taken to prevent any personal injury.
26
Publicité
