Publicité
Les langues disponibles
Les langues disponibles
Schematic diagram of leveling the door's body:
Refrigerator door adjustment:
Open the door, use the wrench to loosen the lock nut and turn the adjustment nut anti -
clockwise (to raise the height of the door) or clockwise (to lower the door). door height).
Once the doors are aligned, then tighten the lock nut by turning it anti-clockwise.
Cleaning before first use
Wipe the inside of the refrigerator with soapy water. Then rinse with lukewarm water with a
damp sponge or cloth. Wash the bins and shelves. In warm soapy water and dry completely.
Before connecting your device
Check that you have an outlet that is compatible with the plug supplied with the refrigerator.
If not see section titled ELECTRICAL INFORMATION.
DO NOT TURN ON UNTIL FOUR HOURS AFTER REFRIGERATOR HAS BEEN MOVED.
The coolant needs time to settle. If the unit is turned off at any time, wait 4 hours before
plugging it back in to allow the coolant to properly replenish.
Rest time
Once the refrigerator is properly installed and thoroughly cleaned, do not turn it on
immediately. Be sure to turn on the refrigerator after more than one hour of rest, in order to
ensure its normal operation.
27
Publicité
