Batavia GIRAFFE AIR Mode D'emploi page 12

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English
Do not lean too far out
from the ladder when
you are standing on it.
You should always stand firmly
with both feet on the same step
and keep the centre of your body
(belly button) between the
beams.
– Under no circumstances climb off
the ladder at great height without
an additional safeguard. Secure
the ladder or use a suitable
mechanism for securing the
stability.
Do not stand on the
top three rungs of the
1
2
3
ladder. Attention, the
top bar is not considered a rung.
The top bar may also not be used
as stepping surface.
– Only use the ladder for simple
tasks that do not take much time
to complete.
work under electrical voltage. The
ladder is made of conductive
material. Use non-conductive
ladders for unavoidable live
electrical work.
– Do not use the ladder outdoors
during adverse weather
conditions, e.g. strong wind or
storm.
– Ensure that children do not play
10
– Keep children away from the
– If possible, lock all doors and
– Wear suitably sturdy shoes when
Do not use
the ladder
to perform
– Do not remain too long on the
with the ladder. Do not leave the
ladder unsupervised when it is
set up.
ladder.
windows in the work area, but
not emergency exits.
Always climb up and
down the ladder with
your face to the ladder.
Keep a secure grip on
the ladder when
ascending and
descending. Maintain a handhold
whilst working from a ladder or
take additional safety precautions
if you cannot.
Do not use the ladder
to bridge distances or
as a bridge.
you climb onto the ladder.
Avoid working on the
ladder with a one-
sided load, e.g. drilling
sideways through solid materials
(e.g. bricks or concrete).
ladder without regular pauses
(tiredness is a danger). Climb off
of the ladder immediately if you
feel tired.
Leaning ladders for
min.
reaching elevated
1 m
heights should be

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bt-tl009

Table des Matières