Features And Technical Specifications; Identification Of Components - EMAK PW 160 Manuel D'utilisation Et D'entretien

correctly and according to current regulations in the country where the water cleaner is installed.
• Total Stop: this stops operation of the water cleaner every time the control lever on the cleaner gun is
released.
• By-pass: means the particular operating mode of the water cleaner that is achieved when the lever of
the cleaner gun is released during normal operation. In this condition, the pressure gauge signals lack
of pressure and the pumped water returns to the suction unit thanks to the pressure control valve.
• Easy Start: this aids starting up the water cleaner by lowering the pressure for the first moments of its
operation.
2 Features and Technical Specifications
ELECTRICAL CONNECTION
Mains power supply
Absorbed power
Fuse
HYDRAULIC CONNECTION
Maximum inlet water temperature
Minimum inlet water temperature
Minimum inlet water flow
Maximum inlet water pressure
Maximum priming depth
PERFORMANCE
Water flow
Maximum pressure
Recoil of cleaner gun
Sound level
Operator arm vibrations
WEIGHT AND DIMENSION
Lenght x width x height
Weight
Detergent tank
All features and technical specifications are only indications. The Manufacturer reserves the right to modify the appliance as it
deems necessary.
2.1 Identification of Components
Please also refer to figures A to D, which are located at the start of these operating and maintenance
instructions.
1. Switch
2. Electrical wire + plug
3. Pressure indicator
4. Detergent tank filling plug (only PW 170C -
IP 1700S)
5. Water outlet connection (only PW 160 - IP 1600)
6. Hose reel (only PW 160C - PW 170C - IP 1700S)
7. High-pressure hose
8. Water gun
9. Water gun lever
10. Water gun lever safety lock
11. Lance hose
12. Nozzle-holding multi-adjusting head
13. Knob and hose reel lever (only PW 160C -
PW 170C - IP 1700S)
14. Water suction connection
15. Water suction filter
PW 160 - PW 160C - IP 1600
230 V - 1~50 Hz
2,3 kW
50 °C - 122 °F
600 l/h - 158 US gph
0,8 MPa - 8 bar - 116 psi
480 l/h - 127 US gph
14 MPa - 140 bar - 2031 psi
24 N
75 dB (A)
1,14 m/s2
38 x 32 x 89 cm - 15 x 13 x 35 in
17 kg - 37 lb
—
16. Setscrew wrench for nozzle disassembly
17. Pin for nozzle cleaning
18. Technical data plate
19. Room for housing the lance pipe
20. Room for housing the water gun
21. Support to wind the electrical wire
22. Rotojet (only PW 160C - PW 170C - IP 1700S)
25. Water cleaner/hose reel connecting hose (only
PW 160C - PW 170C - IP 1700S)
26. Accessory support (only PW 160C - PW 170C -
IP 1700S)
27. Caution plate
28. Thermal switch
29. Warning plate
30. Handlebar
31. Foaming lance (only PW 160C - PW 160 - IP 1600)
PW 170C - IP 1700S
2,7 kW
16 A
5 °C - 41 °F
700 l/h - 185 US gph
0 m - 0 in
540 l/h - 143 US gph
15,5 MPa - 155 bar - 2248 psi
25 N
81 dB (A)
2,24 m/s2
19 kg - 42 lb
1,75 l - 0,46 US gal
GB
17