Press Swing button
Swing
The horizontal louver will swing up and down
automatically when pressing Swing button.
Press again to make it stop.
Swing
NOTE: When the unit is off, press and hold MODE and SWING buttons together for one second,
the louver will open for a certain angle, which makes it very convenient for cleaning. Press and hold
MODE and SWING buttons together for one second to reset the louver
Press LED button
LED
Press this button to turn on and turn off
the display on the indoor unit.
2s
Swing
Keep pressing this button more than 2 seconds,
the vertical louver swing function is activated.
(Not for this model)
If continue to press the SWING button, five
different airflow directions can be set. The
louver can be move at a certain range each
time you press the button.
until the direction you prefer is reached.
(Model dependent).
Press this button more
LED
than 5 seconds(some units)
Keep pressing this button more than 5 seconds,
the indoor unit will display the actual room
temperature. Press more than 5 seconds again
will revert back to display the setting temperature.
73
Press the button