Wahl 4314 Manuel D'utilisation page 14

ENGLISH
Product description
de
Description of parts (Fig. 1)
A TOURMALINE coated front grill
en
B Removable filter for the air inlet aperture
C Cold shot button
fr
D Switch for temperature settings
E On/off switch, fan settings
it
F Hanging loop
G Mains cable
H Narrow attachment nozzle
es
I
Wide attachment nozzle
J Styling diffuser
pt
nl
Technical data
Drive:
da
Operating voltage:
Power consumption:
Dimensions (LxWxH):
sv
Weight:
Emission sound
no
pressure level:
fi
Vibration:
tr
Operating conditions:
Ambient temperature:
pl
The appliance is safety insulated and radio screened.
cs
It meets the requirements of EU Electromagnetic Com-
patibility Directive 2014/30/EU and Machinery Directive
2006/42/EC.
sk
hr
Operation
Preparation
hu
f Check that the contents are complete.
f Check all the parts for possible transport damage.
sl
Safety
ro
Caution! Damage due to incorrect power
supply.
bg
f Only operate the appliance with the voltage
stated on the nameplate.
ru
Operation
uk
1. Insert the mains plug into the socket.
et The hairdryers have 3 temperature settings and
2 fan settings that, thanks to separate switches,
enable a total of 6 temperature/fan settings. Occa-
lv
sionally, the cold shot button (C) can be used to
fix the hairstyle.
lt
2. Switch on the appliance at the on/off switch (E).
el
ar
14
AC motor
220 – 240 V / 50/60 Hz
2000 – 2400 W
200 x 90 x 220 mm
530 g without mains cable
Fan setting 1
Max. 71 dB(A) @ 100 cm
Fan setting 2
Max. 76 dB(A) @ 100 cm
< 2.5 m/s²
0°C – +40°C
3. Select the desired fan setting.
Fan-setting switch (E):
I
Fan setting 1, for a gentle airflow
II
Fan setting 2, for a strong airflow
4. Select the required temperature setting.
Switch for temperature settings (D):
Temperature setting 1, for cold air

•
Temperature setting 2, for hot air
• • Temperature setting 3, for hotter air
Cold shot button(C):
By pressing the button and keeping it depressed,
the hairdryer can be switched to cold air for short
periods. To return to the set temperature, simply
release the cold-shot button.
5. Using the on/off switch (E), switch off the appliance
after use.
Operation
Styling with the nozzle
The nozzle can be used to direct the airflow onto the styl-
ing brush.
1. Position the nozzle and press it towards the housing
(Fig.2ⓐ).
2. You can remove the nozzle simply by pulling it off in the
direction of the arrow (Fig. 2ⓑ).
TOURMALINE coating
Negative ions have an antistatic effect and are gentle to the
hair. They close the scale layer, creating a smooth, silky
hair surface. They lock in the natural moisture of the hair,
thereby creating the ultimate shine.
Overheat protection
The hairdryer is fitted with an overheat protection facility.
Should the appliance overheat, the heating process is
interrupted and only cold air flows out. After the appliance
has cooled down, the heating element will switch on again
automatically.
Maintenance
Warning! Injuries and material damage due to
incorrect handling.
f Switch off the appliance before cleaning it or
performing any maintenance. Disconnect the
appliance from the power supply.
f Allow the appliance to cool down completely.