Publicité
Les langues disponibles
Les langues disponibles
• If a stationary appliance is not fitted with a supply cord and
a plug, or with other means for disconnection from the supply
mains having a contact separation in all poles that provide
full disconnection under overvoltage category III conditions,
the means for disconnection must be incorporated in the
fixed wiring in accordance with the wiring rules. This is also
applicable for appliances with a supply cord and plug when
the plug is not accessible after installing the appliance. Using
an omnipolar switch with a contact separation of at least 3
mm fitted in the fixed wiring will fulfil this requirement.
Use
WARNING!
Risk of injury, burns, electrical shock or fire.
• Do not change the specification of this appliance.
• Do not put electrical appliances (e.g. ice cream makers) in
the appliance unless they are stated applicable by the
manufacturer.
• Be careful not to cause damage to the refrigerant circuit. It
contains isobutene (R600a), a natural gas with a high level
of environmental compatibility. This gas is flammable.
• If damage occurs to the refrigerant circuit, make sure that
there are no flames and sources of ignition in the room.
Ventilate the room.
• Do not let hot items to touch the plastic parts of the
appliance.
• Do not store flammable gas and liquid in the appliance.
9
Publicité
