Domus HPW-08 Manuel D'utilisation page 44

Import/Export Configuration: It is possible to import a machine configuration from a USB
memory stick or to export the current machine configuration to a memory stick. When this button is
pressed, an intermediate window is displayed where we select whether to import or export (as in
programmes).
Credit Mode: If the washing machine is in self-service mode, the password for Credit Mode (1234
by default) can be configured. Make a note of the password in a safe place. If you lose it, please contact
the technical support service.
HUD: In self-service mode, it is also possible to configure the Main screen (first and second
selection screens)
Beep: Option permitting the buzzer to be disabled. By default it is enabled.
RABC/Traceability: The information for each wash is registered, and the information saved (see
section 4.2).
Grace Period: When this button is pressed, an intermediate screen is displayed from where it is
possible to activate or deactivate the grace period and edit the value between 1 and 99 minutes (the
default setting is enabled and 1 minute).
Self-service statistics: This provides data about payments and the number of times each of the
favourite programmes is run. When the self-service statistics button is pressed, the following screen is
displayed.
Press "TOTAL" to display the total values for the machine. If a date is entered, the statistics are only
shown for this period. Press "Reset" to set all the values to 0, resetting the statistics.
40
and the
Run screen. (See section 9.2.2).