Domus HPW-08 Manuel D'utilisation page 35

This warning is displayed on launching a calibration of the weighing kit, in order to inform the
user that the machine must be empty, with no additional weights on top, etc., before
WEIGHT CALIBRATION
launching a calibration.
None. Warning is for information only. "OK" button to hide warning and launch calibration.
This warning is displayed while the weighing kit calibration is in process.
CALIBRATION IN
None. Warning is for information only. There is no button and the text is displayed for 5
PROGRESS
seconds while the calibration is in process.
This warning is displayed when, on completion of the calibration process, it has not been
CALIBRATION ERROR possible to set the weighing system to zero correctly.
None. Warning is for information only. "OK" button to hide warning.
This warning is displayed when, on pressing "Start" to run a wash programme, a weight 3 Kg
less or 10 Kg more than the nominal weight is measured.
CALIBRATION NEEDED
The 2 options "Cancel" or "OK" are displayed. Press "OK" to continue with the programme
with the nominal weight. Press "Cancel" to abort the programme.
This warning is displayed on pressing the Easy Load button on the main screen. The user will
be told to insert the laundry and close the door and then asked if they wish to launch the
START EASY LOAD? Easy Load cycle.
The 2 options "Cancel" or "OK" are displayed. Press "Cancel" to abort the Easy Load cycle
and return to the selection screen. Press "OK" to launch the Easy Load cycle.
This warning is displayed while the Easy Load cycle is running, advising the user that it is in
EASY LOAD IN process.
PROGRESS... No buttons are available. Message is solely for information; the user can do nothing except
wait for the cycle to end.
This message is displayed at the start of the wash programme when the "smart weight"
option is on.
LOAD DETECTION
No buttons are available. Message is for information only. This operation may last several
minutes.
Translation of original instructions.
31