Siebert S202 Série Manuel D'utilisation page 24

Features
Brilliant LED display
The units are Profibus-DP slaves according EN 50 170.
The address is set with rotary switches (00...99).
The baud rate is recognized automatically. It can be up to 12 MBaud.
The GSD file " SIEB0986.GSD " on disc is included in the delivery.
In the event of a bus error, minus signs appear in the display.
Parameterization via menu
Block diagram
The Profibus interface (9-pin D-Sub socket) has the following assignment:
Pin 1 2
Signal – –
Display range
Depending on the version, the units show the following number of characters:
S202-x2/06/0x-001/0B-K0 (2 digits):
S202-x3/06/0x-001/0B-K0 (3 digits):
S202-x4/06/0x-001/0B-K0 (4 digits):
S202-x5/06/0x-001/0B-K0 (5 digits):
S202-x6/06/0x-001/0B-K0 (6 digits):
24
3 4 5
B RTS GND
C2...C1
C3...C1
C4...C1
C5...C1
C6...C1
6 7 8
+ 5V – A
BAL S202 PFB M 1.0
9
–