Parkside Performance PRDSP 20-Li C2 Instructions D'utilisation Et Consignes De Sécurité page 53

˜ Inserting/removing the
battery pack
1 . Open the battery compartment cover
(Fig . I) .
2 . Inserting: Place the battery pack
the guide track and push it back into the
product . The battery pack will audibly snap
in .
3 . Removing: Press the release buttons
on the battery pack
4 . Close the battery compartment cover
˜ Checking the battery pack's
charging level
Fig . C
o Press the button
[ 18 ]
pack .
o The battery pack's
indicated by the battery level indicator
LEDs
Red ‒ Yellow ‒ Green Battery pack fully
Red ‒ Yellow
Red
˜ PARKSIDE app
˜ Connecting the product to
the PARKSIDE app
Activate/deactivate the Bluetooth
function on the battery
Press and hold the
o
18 ] [
battery pack for 3 seconds to activate
®
the Bluetooth function . The orange LED of
the charging level LEDs
Bluetooth ® function is enabled .
o Release the button
5 ] [
[ 18 ]
on
[ 19 ]
18 ] [
and pull it out .
[ 5 ]
.
20 ] [
on the battery
18 ] [
charging level is
[ 21 ]
Status
charged
Battery pack half
charged
Battery pack needs to
be charged
®
20 ] [
button on the
21 ] [
lights up . The
20 ] [
.
Press and hold the
o
the battery pack
deactivate the Bluetooth
orange LED of the charging level LEDs
goes off . The Bluetooth
deactivated . In the PARKSIDE app the
product is shown as offline .
˜ Connecting the product to
the PARKSIDE app again
NOTE
u
The product can only be connected
to the PARKSIDE app if the battery
18 ] [
pack is inserted in the product .
u
Only Smart Performance
rechargeable batteries can be connected
to the PARKSIDE app .
:
1 . Press and hold the
battery pack
the Bluetooth
2 . Enable the Bluetooth
smartphone .
3 . Open the PARKSIDE app .
˜ Connecting the product
for the first time to the
PARKSIDE app
{Add a
1 . Select
tools} tab . The PARKSIDE app scans the
area for available devices . The PARKSIDE
app indicates if available devices have
been found .
2 . Tap on the product name to select the
battery pack
3 . Tap {Done}
battery pack
tools} tab and can be selected .
4 . Select the battery pack
about the product can be found in the
{Your tools}
installed on the product .
[ 20 ]
button on
18 ] [
for 10 seconds to
® function . The
®
function is
[ 20 ]
button on the
[ 18 ]
for 3 seconds to activate
®
function .
®
function on your
tool}
or on the {Your
[ 18 ]
.
to confirm the connection . The
[ 18 ]
is listed in the {Your
[ 18 ]
. The information
tab if the battery pack is
GB/IE
21 ] [
51