for Living 052-9707-2 Mode D'emploi page 15

Step-by-step Guide
STEP 9
If there are plastic stoppers, remove and
discard them. These are stablilzers that
protect the motor during shipping.
Align the holes from the blade arms and the
host and tighten the pre-locked screws on
the blade arms (see Fig. 9).
STEP 10
Insert the neutral line (white) and live
line (blue) reserved in the switch box at
the bottom of the main body and the
neutral line (white) and live line (black)
reserved for light kit, then align the
cover and the switch box with the
holes, and fix the 3 screws (see Fig.
10).
9
10
13
52" Ceiling Fan