for Living 052-9707-2 Mode D'emploi page 10

Step-by-step Guide
Installation
STEP 1
The mounting bracket depicted will vary
depending on the model.
Wooden ceiling
Drill two mounting holes in the ceiling
joist. Securely attach the mounting bracket
to the ceiling or wooden ceiling as
indicated (Fig. 1A).
Normal masonry ceiling
Securely attach the mounting bracket to an
outlet box marked "Acceptable for Fan
Support", using the supplied outlet box
screws with two washers (see Fig. 1B).
STEP 2
Downrod assembly
Remove the lock pin and take out the
hanger pin, then remove the hanger ball
from the downrod assembly by loosening
the set screw and removing the cross pin
(see Fig. 2).
8
52" Ceiling Fan
1A
1B
2
Hanger pin
Cross Pin
Lock pin