Publicité
Les langues disponibles
Les langues disponibles
EN
Symbols
Wear protective gloves
Wear hearing protection
Technical data
Model
Power - Voltage/frequency
No load speed
Blade size
Cutting capacity
Table cutting depth
Sliding table
Weight
Includes
Introduction
Note:
As per the applicable Product Liability Law, the manufacturer of this device will not be liable for damages that occur in this device or that are caused by this
device in the following cases:
• Improper handling
• Non-observation of the operating instructions.
• Repair by third parties, unauthorized technicians.
• Installation and replacement with non-original spare parts.
• Use not in conformity with the manufacturer's specifications.
• Failures of the electrical system attributable to non-observation of the electrical specifications and VDE clauses 0100, DIN 57113 / VDE0113.
We recommend the following:
Please read the instructions in the present manual carefully before using the tile-cutting machine.
Read the instructions for use
Please read the Instructions for Use carefully before setting up, commissioning or intervening in the machine.
Dangerous electric voltage
Caution! Switch off the mains power supply before making any intervention in the tile-cutting machine.
Risk from sudden starting
Caution! The tile cutting machine can restart suddenly after a power failure.
Please read the entire text of the operating instructions thoroughly before installation and start-up.
This operating instructions manual will help you get to know the machine and utilize its use options better. The operating instructions manual contains
important instructions of working safely, correctly and economically with the machine, and on how you can avoid risks, save on repair costs, reduce downtime
and increase the reliability and shelf-life of the machine.
In addition to the safety clauses of this operating instructions manual, you must also observe the specifications of your country applicable to the operation of
the machine without fail.
Keep the operating instructions manual in a plastic cover near the machine, protected against dirt and humidity.
It must be read and observed carefully by all machine operators before starting work on the machine.
Only persons who are trained to use the machine and who have been instructed about the risks involved should be allowed to operate the machine. The
required minimum age of workers must to be observed. Besides the safety instructions contained in this operating instructions manual and the specifications
of your country, the generally recognized technical rules of engagement for the operation of the machine must also be observed.
7
BTC3500
2000W S6 - 230V / 50Hz
2800 rpm
350 mm - 25.4 x 3.2 mm
800 mm
90° / 45°: 90 / 65 mm
530 x 430 mm
74 kg
Foldable base with wheels & water pump
WWW.NIKOLAOUTOOLS.GR
Wear eye protection
Do not reach into cutting wheel while it is running
* The manufacturer reserves the right to make minor changes to product design and
technical specifications without prior notice unless these changes significantly affect the
performance and safety of the products. The parts described / illustrated in the pages of the
manual that you hold in your hands may also concern other models of the manufacturer's
product line with similar features and may not be included in the product you just acquired.
* To ensure the safety and reliability of the product and the warranty validity, all repair,
inspection or replacement work, including maintenance and special adjustments, must only
be carried out by technicians of the authorized service department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with
non-provided equipment may cause malfunctions or even serious injury or death. The
manufacturer and the importer shall not be liable for injuries and damages resulting from
the use of non-conforming equipment.
Wear a dust mask
Publicité
