Grundig TR 3200 BT Mode D'emploi page 42

BLUETOOTH­MODE
Reconnecting­the­Bluetooth­device
1 If you move out of range or turn off the Blue-
tooth feature on your device, the unit will dis-
connect from your device.
2
To reconnect, simply access the Bluetooth
Manager on your Bluetooth device and select
the Grundig DTR5000, TR3200.
Note:­
In case of the registered DTR 5000 2.0 BT
7
DAB+ WEB, TR 3200 BT DAB+ WEB can-
not connect to the Bluetooth device again,
please remove the Grundig DTR5000,
TR3200 from the Bluetooth device list,
search and connect again.
ALARM­MODE
Setting­the­alarm­times­and­mode
1 8
Press » « to switch on the device.
2 Press and hold »Menu/INFO« on the device,
select »Menu/INFO« → »ALARM«
3
Alternatively, press and hold
BACK« on the device or press »ALARM« on
remote control.
– Display: »Alarm 1 Off [00:00]« and
»Alarm 2: Off [00:00]«.
4 Select »Alarm 1« or »Alarm 2« with vol-
ume knob on the device or »
mote control.
5
Select the option »Alarm1 « with left and
right button and confirm by pressing »OK«.
– Display: »Alarm1 «.
6 Enable: Off, Daily, Once, Weekends or Week-
days [Select the option with volume knob on
the device or » /
and confirmed by pressing »OK« ].
7
Time: [set hour and minute, with volume knob
on the device or »
and confirmed by pressing »OK« ].
42­ ­ ENGLISH
­---------------------------------------------------------------------------------------------------
­---------------------------------------------------------------------------------------------------------------------
»ALARM/
/ « on the re-
« on the remote control,
/
« on the remote control,
Automatic­shutdown
If Bluetooth is selected as input source and no Blue-
tooth device is connected, the DTR 5000 2.0 BT
DAB+ WEB, TR 3200 BT DAB+ WEB switches
automatically to Stand-by mode after 15 minutes.
8
Mode: »Buzzer, Internet
DAB or FM« [Select the option with volume
knob on the device or »
control, and confirmed by pressing »OK« ].
9
Preset: Last listened,
(Internet radio, DAB or FM is set, no
such setting if Buzzer was selected) [Select the
option with volume knob on the device or »
/
« on the remote control, and confirmed by
pressing »OK« ]
10­ Volume: 0-32 [adjust with volume knob on the
device or » / « on the remote control, and
confirmed by pressing »OK« ].
11­
Save [confirmed by pressing »OK«, other-
wise the alarm setting is not saved].
radio,
/
« on the remote
or Preset 1-10