Publicité
Les langues disponibles
Les langues disponibles
minor movements. Do not move the appliance over long distances.
▪
Do not lean or climb on the appliance or its elements.
▪
In order to avoid falling objects and to prevent damage to the appliance, do not overload the
compartments of the appliance.
To avoid contamination of food, please respect the following instructions:
▪
clean regularly surfaces that come in contact with food and accessible drainage
systems.
▪
store raw meat and fish in suitable containers so that it is not in contact with or drip onto
other food.
Caution! Cleaning and servicing
▪
Before carrying out servicing, switch off the power supply and disconnect the appliance.
▪
When cleaning the appliance, do not use metal objects, steam systems, volatile fluids,
organic solvents or abrasive substances.
▪
Do not use sharp or pointed objects to remove ice. Use a plastic scraper.
Important information concerning installation!
▪
To ensure proper electrical connection, follow the recommendations given in the present
manual.
▪
Unpack the appliance and visually check that it is not damaged. Do not connect a damaged
appliance. Inform your retailer or point of sale of any damage. In such a case, keep the
packaging.
▪
It is recommended that the appliance be allowed to settle for at least 4 hours before
connecting the electrical power supply, so that the compressor fluid feed is correct.
▪
Proper air circulation is necessary to avoid overheating. To ensure sufficient ventilation,
observe the installation recommendations provided.
▪
In order to avoid fire risk, wherever possible, ensure that the appliance is not in contact with
walls or with any hot element (compressor, condenser). Observe the installation
recommendations.
▪
The appliance should not be placed close to radiators or cooking hot plates or gas rings.
▪
Check that electrical sockets remain accessible when the appliance is installed.
▪
This refrigerating appliance is not intended to be used as a built-in appliance
POWER SAVING
To limit the electricity consumption of your appliance:
▪
Install it in an appropriate place (see "Installing your appliance").
▪
Leave the doors open as little time as possible.
▪
Do not put food that is still hot into the appliance.
▪
To ensure that the appliance operates properly, clean the condenser regularly (see "Routine
servicing of your appliance").
▪
Regularly inspect the door seals and ensure that they are still closing properly. If this is not
the case, contact your after-sales service.
21
Publicité
