Technical Specifications - Nicols POWER LED STROBE Manuel D'utilisation

2.Technical Specifications

Voltage：AC 230/50Hz
LED: 132 pcs (SMD 5050) / 7000k
Power consumption：60W
Dimension：365 x 144 x 166 mm
Weight：2.8kg
Operating modes : DMX, AUTO, Sound activation and MASTER/SLAVE
DMX channels : 3
3.Settings
Rear panel :
Control modes
GETTING STARTED-CONTROL SELECTION
PLEASE REFER TO THE TABLE BELOW TO SELECT YOUR REQUIRED MODE TO
CONTROL.
DMX : ENSURE DIP SWITCHES 9+10 ARE SET TO OFF POSITION and ADDRESS YOUR
FIXTURE ACCORDING TO YOUR CONSOLES PATCH
AUTO : SET DIPSWITCH ACCORDING TO TABLE X
AUDIO : SET DIP SWITCH 9 TO ON AND ADJUST POTENTIOMETER TO SUIT YOUR
PREFERENCE TO MIC SENSITIVITY
MASTER : SET DIPSWITCH ACCORDING TO TABLE X. FOR MASTER AND CONNECT
DMX CABLE TO SLAVE UNITS.
Dipswitches
8-