Nicols POWER LED STROBE Manuel D'utilisation page 9

THE DIAGRAM ILLUSTRATES THE DIPSWITCH INTERFACE. IT ENABLES YOU TO SET
THE OPERATING MODES AND ADDRESS THE FIXTURE FOR DMX CONTROL. EACH
SWITCH REPRESENTS A VALUE SHOWN IN THE TABLE BELOW.
IF YOU WANT TO SET AN DMX ADDRESS YOU CALCULATE THE SWITCHES
REEQUIRED TO GET TO THAT NUMBER AND SET THEM TO THE ON POSITION. E.G.
ADDRESS#10 WOULD REQUIRE 4+2.
ADDRESS 346 WOULD REQUIRE SWITCHES 9+7+5+4+2.
DIPSWITCH SETTINGS O=OFF I=ON X=USER SET VALUE
DMX CHANNEL MAP
AUDIO/AUTO/SLAVE MODES
TO ENABLE AUDIO MODE, PUT DIPSWITCHES 9+10 TO THE ON POSITION
ADJUSTING THE LIGHTS RATE AND TIME CAN BE DONE IN THE FOLLOWING
TABLES. WHEN RUNNING AUTO MODE YOU CAN SLAVE MULTIPLE UNITS
SIMPLY BY LINKING TOGETHER WITH A DMX XLR CABLE.
BOTH RATE AND DURATION CAN BE SET TO AUDIO, AUTO AND MASTER/SLAVE
MODES.
9-