Nicols POWER LED STROBE Manuel D'utilisation page 7

Thank you for investing in our POWER LED STROBE
1. Safety Introductions
Please read the instructions carefully which includes important information about
the installation, operation and maintenance.
Please keep this User Guide for future consultation. If you sell the unit to another user, be
sure that they also receive this instruction booklet.
All fixtures are intact from the manufacturer, please operate follow up the user manual,
artificial fault are not under guarantee repair.
Unpack and check carefully that there is no transportation damage before using the unit.
The carton box includes :
1 x POWER LED STROBE
1 x Hanging bracket
1 x Set of powercon Blue/white
1 x Safety cable
The unit is for indoor use only. Use only in a dry location.
Do install and operate by operator.
Ensure adequate ventilation prior to operation.
Do not power it on when the product is in the package.
Before operating, ensure that the voltage and frequency of power supply match the power
requirements of the unit.
It's important to ground the yellow/green conductor to earth in order to avoid electric shock.
Do not allow children to operate the fixture.
In the event of serious operating problem, stop using the unit immediately.
Do not open the unit as there are no user serviceable parts inside.
Never try to repair the unit by yourself. Repairs carried out by unskilled people can lead to
damage or malfunction. Please contact the nearest authorized technical assistance center.
Disconnect the mains power if the fixture is not used for a long time.
Do use original packing materials once transport it again.
This is a strobe light therefore it may induce seizures within people with epilepsy.
Do not look at the beam light directly in order to avoid visual problems
Please pay attention to the LED emissions that can cause eyes sensibility.
7-