Usage - Marmitek MegaView 141 UHD Guide Utilisateur

5 Usage

1. Switch on the HDMI source (for example, a TV decoder or multimedia PC).
2. Switch on the TV or projector and select the appropriate input. This is usually
done by pressing the A/V or EXT button on your remote control.
3. You will immediately receive images from the connected HDMI source.
4. The MegaView 141 UHD™ can also be used to operate the HDMI source from
another room, by pointing your own remote control at the IR receiver and pressing
a button.
10
© MARMITEK